WindChaser Products PACRWC instruction manual Oscillating Louvers, Exhaust KIT Installation

OPERATION USING ADJUSTABLE DIAL SWITCH

To adjust desired temperature and program the timer. Select the desired temperature by turning Adjustable Dial Switch when using the unit in cooling or heating function.

The desired temperature range is from 61oF-88oF (16oC-

31oC). The LED flashes to display the desired temperature during the setting, it displays the room temperature after 5 seconds, .

Press Timer On/Off button, turn adjustable dial switch to change the clock to the desired time for the unit being turned on or off.

ADJUSTABLE and

OSCILLATING LOUVERS

Manual Horizontal	Automatic Oscillating
Louvers	Louvers

NOTE:

1.Do not abuse the remote control.

2.Do not place the remote control in a location that is exposed to direct sunlight or next to a heating unit or other heat source.

3.Do not use rechargeable batteries because they differ from standard dry cell batteries in shape, dimension and performance.

4.Be sure to replace the batteries with two new batteries of the same type.

Remote

Display

1

EXHAUST KIT

INSTALLATION

3

2 4

5

HorizontalVertical

NOTE: Your window kit has been designed to fit most standard vertical and horizontal window applications. However, it may be necessary for you to improvise/modify some aspects of the installation procedures for certain types of windows. Please refer to measurements below:

Window slider kit	Window slider kit
	1
minimum: 281/8(72cm)	minimum: 28 /8(72cm)
	3
maximum:553/8(140cm)	maximum:55 /8(140cm)

REMOTE CONTROL

PREPARATIONS

1.Remove the cover from the back of the remote control.

2.Insert two AAA dry-cell batteries (batteries included)

3.Insert the power plug into an outlet.

4.Always point the remote control signal transmitter toward the unit when operating.

5.Make sure that the signal path is not obstructed.

6.The maximum distance at which signals can be received is 26.24 feet.

7.Remove the batteries if the unit is not going to be used for an extended period of time.

8

REMOTE CONTROL FUNCTIONS

1.ON/OFF-

Starts or Stops the Unit

2.WARM

Adjust to desired warm temperature.

3.COOL

Adjust to desired cool temperature.

4.MODE

Select the functions of the unit for: Fan Mode, Air Conditioning Mode, Heating Mode, Dehumidifying Mode and Auto Mode

5.TEMP./%

To display temperature or humidity on both Main LED and LED. Hold the button more than 3 seconds, to convert the temperature display from Fahrenheit (oF) to Celsius (oC) and vice versa. Press the button for less 3 seconds to view the humidity.

6.FAN

Select the fan speed desire: High, Medium and Low

The fan speed can be visually distinguished by the speed of the digital air segments progressing out from the wind mill fan image on the Main LED display.

7.SWING

To start swinging air louvers horizontally by press SWING Button once. At the moment, appears on the Main LED display. To stop, press SWING again. Vertical air flow direction can be adjusted manually.

8.SLEEP BUTTON

Press to select the function of the unit for Sleep Mode.

A Side

WINDOW INSTALLATION

1.Exhaust Ports

2.Air Outlet Hose (exhaust)

3.Air Intake Hose

4.Window Exhaust and Intake Adapter (2)

5.Adjustable Window Panel

Air Inlet and Air Outlet Hose: Extends from 17” (43cm) up to 5.9 ft (1.8m)

Window Kit: Extends from 28.375” (72cm) up to 55.625” (140cm)

NOTE: Air outlet hose (exhaust) should be mounted at A side

1)Select a suitable location, making sure you have easy access to an electrical outlet.

2)Remove the 2 hoses, 2 window exhaust adapters,

1window panel kit.

3)To install the flexible exhaust hoses, insert the end of the hose with the round connector into either the air inlet or air outlet hole on the back of the unit. Turn the hose clockwise to secure the hose into the hole. Do this for both hoses.

4)Screw the window exhaust adapters on both hoses by turning them clockwise.

5)Insert the air inlet window exhaust Adapter into the left hole of the window panel kit. Then insert the air outlet window exhaust Adapter in the right hole of the window panel kit.

NOTE: 1. Step 3 is required only when using cooling or dehumidification modes. In cooling mode the two hoses or the air outlet hose can be installed for the unit to operate.

2.While operating or installing, the hoses should not be blocked by curtains or any other obstructions.

NOTE: WHEN PLACING THE WINDOW PANELS VERTICAL, MAKE SURE THE AIR OUTLET HOSE IS SECURED TO THE TOP OUTLET HOLE OF THE WINDOW PANEL.

5