Operation (continued)
Blowing Feature
Your Vac features a blowing port. It can blow sawdust and other debris. Follow the steps below to use your Vac as a blower.
1.Locate blowing port of your Vac.
2.Insert the locking end of the Dual- Flex™ Locking Hose into the blowing port of the Vac. The hose should snap into place.
!WARNING: Always wear safety eyewear complying with ANSI Z87.1 (or in Canada, CSA Z94.3) before using as a blower.
!WARNING: To reduce the risk of injury to bystanders, keep them clear of blowing debris.
!CAUTION: Wear a dust mask if blowing creates dust which might be inhaled.
!CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the Vac/Blower for extended time or in a noisy area.
3.(Optional) Attach extension wand to opposite end of hose, then place the car nozzle on the wand.
4.Turn Vac on and you are ready to use your Vac as a blower.
Locking Hose
Swivel End
of Hose
Extension Wand
(Optional)
Car Nozzle (Optional)
12