Extreme Networks 17001 manual Connecting a SummitStack 64G Cable

Building a SummitStack Configuration

To connect a SummitStack 64G cable:

1Holding the cable connector with the release tab on top, align the connector with the stacking port on the VIM2 module in the Summit X480 series switch (Figure 88).

Figure 88: Connecting a SummitStack 64G Cable

SH_164

2Firmly press the cable connector into the stacking port until the spring latch on top of the connector clicks into place.

3Repeat steps 1 and 2 to connect the other end of the cable.

116 Summit Family Switches Hardware Installation Guide