Chapter 1Setting Up the CoreModule 800
Connecting Peripherals
8) Connect peripheral I/O | This includes the keyboard, mouse, and CRT. |
devices to the I/O Board. | Skip any devices that are not applicable to your situation. |
| |
| • Connect the keyboard to the keyboard connector (J9A) on the |
| I/O Board (lower connection). |
| Or, Connect a USB keyboard to one of the USB ports on the I/O Board. |
| • Connect the mouse to the PS/2 connector (J9B) on the I/O Board. |
| Or, Connect a USB mouse to one of the USB ports on the I/O Board. |
•Connect the CRT (VGA) monitor cable to the standard
Connecting Boot Devices
9) Connect OS boot device (s) • There are four device options for connecting an (OS) boot device to the CoreModule 800:
a.Connect a floppy disk drive (FDD) to the floppy drive cable on the floppy port connector (J11) on the I/O Board. See Step 7.
Or, Connect a USB floppy drive to one of the USB ports on the I/O Board.
b. Connect an IDE hard disk drive (HDD) to one of the free connectors on the IDE cable from J6 on the CoreModule 800.
• Ampro does not recommend using a preinstalled OS on a hard disk drive to boot and load the operating system. See Note with Step 21.
Or, Connect a USB hard disk drive to one of the USB ports on the I/O Board.
c.Connect a
| Or, Connect a USB |
| Board (USB0 is lower connector). |
| d. Connect an Ethernet cable to Ethernet port (J3) for the PXE server, |
| if you are using the LAN Boot feature. Refer to Steps 17, 18, 19d, |
Ethernet Connection | 19e, 19f and the LAN Boot Note at the end of this chapter. |
|
NOTE | For the most current Hardware and BIOS Information, refer to the |
| CoreModule 800 Hardware Release Notes provided as hard copy |
| in the shipping container. |
|
|
CoreModule 800 | QuickStart Guide | 7 |
