Chapter | Ampro Corporation PCI-104 specs

Chapter 2

Installing CoreModule 800 Options

There are directories and subdirectories under these topics that should provide you with the needed manuals, utilities, and tools not explained earlier.

4.Install any special OS drivers not found on the manufacturer’s diskette(s) or CD-ROM.

Refer to the directories and subdirectories on the CoreModule 800 Doc & SW CD-ROM for instructions when installing the drivers for the desired OS.

If the desired drivers can not be found, contact Ampro through the Virtual Technician on the web site with a request for the driver(s). Refer to the Appendix A, Technical Support for more information.

5.Install any utilities or other development tools you may need from the CoreModule 800 Doc & SW CD-ROM.

Refer to the directories on the CoreModule 800 Doc & SW CD-ROM for instructions on installing and using the utilities or development tools for the desired OS.

CoreModule 800

QuickStart Guide

19

Image 23

Ampro Corporation PCI-104 quick start Chapter

Contents

CoreModule PCI-104 Single Board Computer QuickStart Guide Audience Assumptions Contents Table A-1 CD-ROM Setting Up the CoreModuleRequirements What’s in the Box Preparation Setting Up the Workspace CoreModule 800 Connector Locations Connecting Cables to the CoreModule Skip any steps that do not apply to your situation Refer to the CoreModule 800 I/O Interface Design Library on Cable Connecting Boot Devices Connecting Peripherals Applying Power to the CoreModule Connecting the Power Supply Main Advanced PCIPnP Boot Boot Device Priority Default Jumper # Installed Removed/Enabled GND Wire Color Four Pin # Ten Pin # Signal QuickStart Guide CoreModule Removing the Sodimm Installing CoreModule 800 OptionsInstallation Guidelines Tools Required DDR Sodimm Removing Sodimm from Socket Installing the Sodimm Retaining Latches Angle KeyHidden Pressing down on Sodimm Installing Software, Drivers, and Utilities Chapter QuickStart Guide CoreModule Method Contact Information Appendix a Technical Support Appendix a Interface Board Layout Appendix B Interface Board Signal Pin # On Description Board Interface Board Connectors DTR1 RTS1TXD1 CTS1 Signal OnBoard Description Pin # BSY PD7ACK DS1 Figure B-2. RS-485 Serial Port Implementation Signal From Description Pin # Onboard Connector Signal From Description Pin # Onboard DB9 Connector Signal From Onboard Description Pin # Connector & Pin # Msclk J10 Signal From Onboard Description Pin # Connector & Pin #Msdat Pin # Signal Description Init BusySlct ALF Component Description Miscellaneous Components Connector Pin Number Manufacturer Manufacturer’s PN Appendix C Connector Part NumbersConnector Pin Number Mfg Manufacturer’s PN Appendix C