Chapter 1 | Setting Up the CoreModule 800 |
I/O Interface Board
(I/O Board)
Utility 1a
Connector (J4) 
Utility 1 Cable connected between J4 on I/O Board and J4 on CoreModule 800
Utility 1 
Connector (J4) 
Video Cable &
Connectors (J1)
Utility 2a
Connector (J5)
Utility 2 Cable connected between J5 on I/O Board and J5 on CoreModule 800
Utility 2
Connector (J5)
Floppy Disk Drive
(FDD) Cable &
Connectors (J11)
IDE Cable & Connectors (J6) (Second IDE connector not shown for simplicity.)
CoreModule 800
Ethernet (RJ45) | Power In |
Adapter Board (J3) | Cable & |
| Connectors (J7) |
Figure 1-6. Complete CoreModule 800 Cable Assembly
CM800QkS_07a
Serial Ports
1 & 2 (J7A/B)
Serial TX/TTL
Jumper (JP1)
SMBus (J10)
Utility 1a (J4)
Utility 2a (J5)
Power Button | PS/2 Keyboard/Mouse |
Switch (SW1) | (J9A/B) |
Reset Switch | USB Ports |
(SW2) | 0 & 1 (J8A/B) |
|
| Floppy Disk |
|
| Drive (FDD) |
|
| Interface (J11) |
| Parallel (LPT1) | |
(I/O Board) | Port (J12) | CM800QkS06b |
| ||
I/O Interface Board |
| |
Figure 1-7. I/O Interface Board Connections
6 | QuickStart Guide | CoreModule 800 |
