Extreme Networks 17001 manual EPS-160 External Power Module with EPS-T

EPS-160 External Power Module (with EPS-T)

The EPS-160 External Power Module (Model 10907) is a modular power supply for use with the EPS-T chassis. You can use the EPS-160 as a redundant power supply with the following Extreme Networks switches:

●Summit X150-24t switch

●Summit X150-24x switch

●Summit X150-48t switch

●Summit X250e-24t switch

●Summit X250e-24x switch

●Summit X250e-48t switch

●Summit X450-24t switch

●Summit X450-24x switch

The EPS-T is a rack-mountable chassis or tray that holds one or two EPS-160 power supplies. Each EPS- 160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.

You can order the EPS-T chassis with one or two EPS-160 power supplies already installed. You can also order an additional power supply from your Extreme Networks reseller.

NOTE

Each EPS-160 power supply is shipped with a special redundant power supply cord (Figure 64). An AC power input cord is not provided; you can order an appropriate cord from Extreme Networks or from your local supplier. The power cord must meet the requirements listed in “Selecting Power Supply Cords” on page 218.

Figure 64: Redundant Power Cord Connector

ES4K027

EPS-LD External Power Supply Unit

You can use the Extreme Networks EPS-LD External Power Supply Unit (Model 45019) as a redundant power supply with the following Extreme Networks switches:

●Summit X450a-24t switch

●Summit X450e-24p switch

When attached to the Summit X450e-24p, the EPS-LD provides 465 W total power with 375 W dedicated for PoE applications.

Summit Family Switches Hardware Installation Guide 75