Extreme Networks 17001 manual Installing Summit External Power Supplies, Safety

6 Installing Summit External Power Supplies

This chapter describes how to install external power supplies with the Summit family switches. The chapter includes the following sections:

●Safety on page 173

●Installing an EPS-160 External Power Module (with EPS-T) on page 174

●Installing an EPS-LD External Power Supply on page 177

●Installing an EPS-500 External Power Supply Unit on page 180

●Installing an EPS-150DC External Power Module (with EPS-T2) on page 183

●Installing an EPS-600LS External Power Module on page 189

Read the information in this chapter thoroughly before you start to install or remove an external power supply.

Safety

Only trained service personnel should perform service to Extreme Networks switches and their components. Trained service personnel have read all related installation manuals, have the technical training and experience necessary to be aware of the hazards to which they are exposed in performing a task, and are aware of measures to minimize the danger to themselves or other persons.

NOTE

See Appendix A, “Safety Information” for additional safety information and Appendix B, “Technical Specifications” for additional information regarding regulatory compliance certifications.

CAUTION

Be sure that proper ESD controls are in use before switch maintenance is performed. This includes but is not limited to wrist straps that are grounded to the switch chassis and earth grounds.

CAUTION

The EPS must be installed or removed only by trained service personnel in accordance with the installation instructions. Before installing or removing any components of the system, or before carrying out any maintenance procedures, read the safety information provided in Appendix A of this guide. Not following these precautions can result in equipment damage or shock.

WARNING!

Extreme Networks AC PSUs do not have switches for turning the unit on and off. Remove the wall plug from the electrical outlet to disconnect the power to an Extreme Networks AC PSU. Make sure that this connection is easily accessible.

Summit Family Switches Hardware Installation Guide 173