Extreme Networks 17001 EPS-600LS External Power Module Model, Maximum inrush current, Efficiency

Technical Specifications

Table 49: EPS-600LS External Power Module (Model 10913)

For use with the Summit X450e-48p and X250e-48p switches

Must be installed in the EPS-C chassis (Model 10912)

Operational voltage range	90	to 264 V
Nominal input ratings	100-250 V , 50-60 Hz, 10 A
Nominal input current	7 A @ 115 V		(low-line)
	3.5 A @ 230 V		(high-line)
Line frequency range	47	to 63 Hz
Maximum inrush current	17	A @ 115 V/60 Hz, maximum load
Output power	600 W
Power supply cord type	AC
Power supply input socket	IEC 320 C14
Power cord input plug	IEC 320 C13
Power cord wall plug	Refer to “Selecting Power Supply Cords” on page 218.
Power supply cord gauge	18	AWG (0.75 mm2) up to 6 feet or 2 meters
	or	AWG (1.0 mm2) over 6 feet
	16
Efficiency	85% nominal
Heat dissipation, Watts, BTU/hr	219 W, 747.3 BTU/hr
Power consumption, Watts, BTU/hr	801 W, 2733.1 BTU/hr
Ambient operating temperature	0° C to 40° C (32° F to 104° F)
Output Ratings for EPS-C chassis with 1, 2, or 3 installed EPS-600LS units
One EPS-600-LS unit	582 W output: –48 V/9 A (432 W), 12 V/12.5 A
Two EPS-600-LS units	1116 W output: –48 V/18 A (864 W), 12 V/21 A
Three EPS-600-LS units	1260 W output: –48 V/21 A (1008 W), 12 V/21 A

264 Summit Family Switches Hardware Installation Guide