Extreme Networks 17001 manual Summit XGM2-2xf Option Card, Summit XGM2-2xn Option Card

Summit Option Cards

Figure 167: Summit XGM2-2xn Option Card

SH_010

NOTE

Refer to the Extreme Networks Pluggable Interface Modules Installation Guide for more information about XENPAK modules.

Standards-based CX-4 XENPAKs are also recognized by ExtremeXOS; contact your CX-4 module vendor to obtain these.

Summit XGM2-2xf Option Card

The Summit XGM2-2xf option card allows you to add up to two 10-gigabit XFP modules to the following switches:

●Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)

●Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)

●Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)

The Summit XGM2-2xf option card is compatible with the following 10-gigabit XFP modules:

●LR XFP module

●SR XFP module

Figure 168 shows the Summit XGM2-2xf option card.

198 Summit Family Switches Hardware Installation Guide