Extreme Networks 17001 manual Summit X250e-24t Switch Front Panel

Summit X250e-24t Switch

The front panel of the Summit X250e-24t switch (Figure 7) includes:

●Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of high-density copper connectivity

●Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16. For information about SFPs, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X250e Series Switch LEDs” on page 34.

●Stack number indicator showing the position of this switch in a stacked configuration.

●Serial console port used to connect a terminal and perform local management.

Figure 7: Summit X250e-24t Switch Front Panel

	Console
10/100 Mbps ports	port

Stack

1

2

Stack number indicator Combination ports

SH_038B

The rear panel of the Summit X250e-24t switch (Figure 8) includes:

●Management port with associated LEDs

●Two high-performance stacking ports with associated LEDs

●Redundant power input connector for optional connection to the EPS-160 External Power Module.

See “EPS-160 External Power Module (with EPS-T)” on page 75 for more information. The connecting redundant power supply cable is shipped with the EPS-160 unit.

●AC power input socket.

The internal AC power supply operates from 100 VAC to 240 VAC.

Figure 8: Summit X250e-24t Switch Rear Panel

	External power
Management port	supply connection

Redundant Power Input

! See Manual

10 Gigabit	Power socket
stacking ports
	SH 039
Summit Family Switches Hardware Installation Guide		23