Extreme Networks 17001 Rack-Mounting the EPS-T, Installing an EPS-160 Power Supply into an EPS-T

Rack-Mounting the EPS-T

CAUTION

Do not use the rack-mount brackets to suspend the EPS-T from under a table or desk, or to attach the EPS-T to a wall.

To rack mount the EPS-T:

1Place the EPS-T upright on a stable surface, with the front facing you.

2Remove the mounting bracket kit from the packaging.

3Attach the mounting brackets as follows:

a Place a mounting bracket over the mounting holes on one side of the EPS-T (see Figure 147). b Insert the screws and fully tighten them using a screwdriver.

Figure 147: Attaching the Mounting Bracket

ES4K026

cRepeat steps a and b for the other side of the EPS-T.

4Slide the EPS-T into a 19-inch rack and secure it using appropriate rack-mount screws.

Installing an EPS-160 Power Supply into an EPS-T

To install an EPS-160 power supply into the EPS-T:

1Remove the EPS-160 power supply from the packing material.

2Remove the cover plate from an empty slot on the EPS-T.

3Insert the power supply into the empty slot on the EPS-T.

4Tighten the captive thumbscrews to secure the power supply to the EPS-T.

5Connect the EPS-160 power supply to the Summit switch, following the instructions in the next section, “Connecting the EPS-160 Power Supply to the Switch.”

Summit Family Switches Hardware Installation Guide 175