Extreme Networks 17001 manual Replacing a Summit X650 AC PSU

8 Maintenance Procedures for Summit X650 and Summit X480 Series Switches

This chapter describes how to replace components in a Summit X650 series switch. This chapter includes the following sections:

●Replacing a Summit X650 AC PSU on page 203

●Replacing a Summit X650 DC Power Supply on page 205

●Replacing a Summit X480/X650 Fan Module on page 210

●Replacing a Versatile Interface Module (VIM) on page 211

NOTE

Read the information in this chapter thoroughly before attempting to replace one of the listed Summit X650 components.

Replacing a Summit X650 AC PSU

In a redundant power configuration, you can replace one Summit X650 AC PSU without powering down the switch.

You need the following tools and materials to replace a Summit X650 AC PSU:

●ESD-preventive wrist strap

●Thermal protective gloves

●AC power cord, if you will not be re-using the cord from the removed power supply

An AC power cord is not included with the Summit X650 AC PSU. You must obtain a power supply cord that meets the requirements listed under “Selecting Power Supply Cords” on page 218.

To replace a Summit X650 AC PSU:

1Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an appropriate grounding point.

2Disconnect the AC power cord from the wall outlet and from the PSU.

3Push the latching tab to the left as you pull outward on the handle to disengage the PSU internal connectors (see Figure 171).

Summit Family Switches Hardware Installation Guide 203