Extreme Networks 17001 manual Connecting the DC Power Cables Part

Installing Summit Family Switches

bSlide the spade terminal of the negative wire (–48 V) under the captive square washer on the negative terminal (labeled –).

cSlide the spade terminal of the positive wire (–48 V RTN) under the captive square washer on the positive terminal (labeled +).

Figure 115: Connecting the DC Power Cables (Part 1)

(+)

(–)

-48V

RTN

SH_161

dTighten both screws on the terminal block to 7 inch-pounds (0.99 Newton meters) (Figure 116).

4Snap the cover into place over the terminal block (Figure 116).

142 Summit Family Switches Hardware Installation Guide