Extreme Networks 17001 manual Removing a Switch from a Four-Post Rack

Installing Summit Family Switches

Figure 122: Removing a Front-Mounted Switch from a Two-Post Rack

SH_130

Removing a Switch from a Four-Post Rack

Removing the Summit X650 switch from a cabinet or rack requires two people to maneuver the switch and disconnect the mounting hardware.

To remove the Summit X650 series switch from a cabinet or four-post rack:

1Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate ground point on the rack.

2Verify that all power supplies have been removed from the switch.

3Support the front of the switch while you remove the front rack mounting screws (Figure 123).

4Carefully slide the switch forward out of the cabinet and off the rear mounting brackets.

148 Summit Family Switches Hardware Installation Guide