PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a
b.If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-
come damaged. Remove the key and | UNPLUG THE | |
POWER CORD | . Using the allen wrench, turn both | |
rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
b |
Rear Roller Adjustment Bolts |
c. If the walking belt still slows when walked on, call our Customer Service Department
PROBLEM: The walking belt is |
|
| ||
SOLUTION: | a. If the walking belt is | |||
| and UNPLUG THE POWER CORD | . If the walking | ||
| belt has shifted to the left, | use the allen wrench to | ||
| turn the left rear roller bolt clockwise 1/2 of a turn; | if | ||
| the walking belt has shifted to the right, |
| turn the | |
| bolt counterclockwise 1/2 of a turn. Be careful not to |
| ||
| overtighten the walking belt. Plug in the power cord, |
| ||
| insert the key, and run the treadmill for a few minutes. |
| ||
| Repeat until the walking belt is centered. |
| ||
| b. If the walking belt slips when walked on, first remove |
| ||
| the key and | UNPLUG THE POWER CORD | . Using | |
| the allen wrench, turn both rear roller bolts clockwise, |
| ||
| 1/4 of a turn. When the walking belt is correctly tight- | |||
| ened, you should be able to lift each side of the walk- | |||
| ing belt 2 to 3 inches off the walking platform. Be |
| ||
| careful to keep the walking belt centered. Plug in the |
| ||
| power cord, insert the key, and carefully walk on the |
| ||
| treadmill for a few minutes. Repeat until the walking |
| ||
| belt is properly tightened. |
|
| |
a |
b |
16
