8. See step 3. | Firmly tighten the 1” Bolts (63) and the 2” | 8 |
| |
Bolts (114). |
|
| ||
|
|
| ||
Lower the Handrails (not shown) to the floor. | Make sure |
| 69 | |
that the Frame (86) is centered between the |
|
| ||
Handrails. Firmly tighten the 3” Bolts (61). | Raise the |
|
| |
Handrails to the vertical position. |
|
| 61 | |
|
|
| 86 | 61 |
|
|
|
| |
9. Attach the Weight Rack (107) to the Uprights (73, 108) as | 9 |
| ||
shown with four 3/4” Screws (2). Set the hand weights (not |
| |||
|
| |||
shown) on the Weight Rack, with the lightest weights in the |
|
| ||
center. |
|
|
|
|
| 2 | 107 |
| 2 | |
|
| |
| 73 | 108 |
|
| |
10. Make sure that all parts are properly tightened before you use the treadmill. | Note: Extra hardware may | |
be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the |
| |
walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill. |
|
|
9
