Nortel Networks BMD00007 manual Loading a new switch image

Alteon OS Command Reference

Loading a new switch image

To load a new switch image with the name “MyNewImage-1.img” into image2, follow the steps below. This example assumes you have a FTP/TFTP server at 192.168.10.10.

1.Set the FTP/TFTP server address where the switch image resides:

Set agTftpServer.0 “192.168.10.10”

2.Set the area where the new image will be loaded:

Set agTftpImage.0 “image2”

3.Set the name of the image:

Set agTftpImageFileName.0 “MyNewImage-1.img”

4.Initiate the transfer. To transfer a switch image, enter 2 (gtimg):

Set agTftpAction.0 “2”

5.If you are using an FTP server, enter a username:

Set agTftpUserName.0 “MyName”

6.If you are using an FTP server, enter a password:

Set agTftpPassword.0 “MyPassword”

BMD00007, November 2007 Alteon OS SNMP Agent „ 379