Nortel Networks BMD00007 manual Cfg/sys/radius, Radius Server Configuration, Telnet disableenable

Alteon OS Command Reference

/cfg/sys/radius

RADIUS Server Configuration

[RADIUS Server Menu]

prisrv	-	Set primary RADIUS server address
secsrv	-	Set secondary RADIUS server address
secret	-	Set RADIUS secret
secret2	-	Set secondary RADIUS server secret
port	-	Set RADIUS port
retries -		Set RADIUS server retries
timeout	-	Set RADIUS server timeout
telnet	-	Enable or disable RADIUS backdoor for telnet
on	-	Turn RADIUS authentication ON
off	-	Turn RADIUS authentication OFF
cur	-	Display current RADIUS configuration

Table 6-5System Configuration Menu Options (/cfg/sys/radius)

Command Syntax and Usage

prisrv <IP address>

Sets the primary RADIUS server address.

secsrv <IP address>

Sets the secondary RADIUS server address.

secret <1-32 character secret>

This is the shared secret between the switch and the RADIUS server(s).

secret2 <1-32 character secret>

This is the secondary shared secret between the switch and the RADIUS server(s).

port <RADIUS port configure, default 1645>

Enter the number of the UDP port to be configured, between 1500 - 3000. The default is 1645.

retries <RADIUS server retries (1-3)>

Sets the number of failed authentication requests before switching to a different RADIUS server. The default is 3 requests.

timeout <RADIUS server timeout seconds (1-10)>

Sets the amount of time, in seconds, before a RADIUS server authentication attempt is considered to have failed. The default is 3 seconds.

telnet disableenable

Enables or disables the RADIUS backdoor for telnet. The telnet command also applies to SSH/SCP connections and the Browser-Based Interface (BBI). The default is disabled. To obtain the RADIUS backdoor password for your GbESM, contact your IBM Service and Support line.

on

Enables the RADIUS server.

BMD00007, November 2007 The Configuration Menu „ 185