Alteon OS Command Reference

/cfg/l2/stg <STP group number>/brg

Spanning Tree Bridge Configuration

[Bridge Spanning Tree Menu]

 

prior

- Set bridge Priority [0-65535]

 

hello

- Set bridge Hello Time [1-10 secs]

mxage

- Set bridge Max Age (6-40 secs)

secs)

fwd

- Set bridge Forward Delay (4-30

aging

- Set bridge Aging Time (1-65535

secs, 0 to disable)

cur

- Display current bridge parameters

Spanning Tree bridge parameters affect the global STG operation of the switch. STG bridge parameters include:

„Bridge priority

„Bridge hello time

„Bridge maximum age

„Forwarding delay

„Bridge aging time

Table 6-38Spanning Tree Bridge Menu Options (/cfg/l2/stg/brg)

Command Syntax and Usage

prior <new bridge priority (0-65535)>

Configures the bridge priority. The bridge priority parameter controls which bridge on the network is the STG root bridge. To make this switch the root bridge, configure the bridge priority lower than all other switches and bridges on your network. The lower the value, the higher the bridge pri- ority. The range is 0 to 65535, and the default is 32768.

RSTP/MSTP: The range is 0 to 61440, in steps of 4096 (0, 4096, 8192...), and the default is 32768.

hello <new bridge hello time (1-10 secs)>

Configures the bridge hello time.The hello time specifies how often the root bridge transmits a configuration bridge protocol data unit (BPDU). Any bridge that is not the root bridge uses the root bridge hello value. The range is 1 to 10 seconds, and the default is 2 seconds.

This command does not apply to MSTP (see CIST on page 227).

mxage <new bridge max age (6-40 secs)>

Configures the bridge maximum age. The maximum age parameter specifies the maximum time the bridge waits without receiving a configuration bridge protocol data unit before it re configures the STG network. The range is 6 to 40 seconds, and the default is 20 seconds.

This command does not apply to MSTP (see CIST on page 227).

BMD00007, November 2007

The Configuration Menu „ 233

Page 231
Image 231
Nortel Networks BMD00007 manual Cfg/l2/stg STP group number/brg, Spanning Tree Bridge Configuration