Nortel Networks BMD00007 manual Temporarily Disabling a Port, Port ACL Configuration

Alteon OS Command Reference

Table 6-26Port Link Configuration Menu Options (/cfg/port/gig)

Command Syntax and Usage

cur

Displays current port parameters.

Temporarily Disabling a Port

To temporarily disable a port without changing its stored configuration attributes, enter the fol- lowing command at any prompt:

Main# /oper/port <port alias or number>/dis

Because this configuration sets a temporary state for the port, you do not need to use apply or save. The port state will revert to its original configuration when the GbE Switch Module is reset. See the “Operations Menu” on page 330 for other operations-level commands.

/cfg/port <port alias or number> aclqos

Port ACL Configuration

[Port INT2 ACL Menu]		this port
add	- Add ACL or ACL group to		port
rem	- Remove ACL or ACL group	from this
cur	- Display current ACLs for this port

Table 6-27Port ACL Menu Options (/cfg/port/aclqos)

Command Syntax and Usage

add aclgrp <ACL number or Group number, 1-896>

Adds the specified ACL or ACL Group to the port. You can add multiple ACL Groups to a port, but the total number of precedence levels allowed is eight.

rem <ACL number, 1-896>

Removes the specified ACL or ACL Group from the port.

cur

Displays current ACL QoS parameters.

216 „ The Configuration Menu BMD00007, November 2007