Nortel Networks BMD00007 Cfg/l2/mrst/cist/brg, Cist Bridge Configuration, Prior, Fwd 4-30 seconds

Alteon OS Command Reference

/cfg/l2/mrst/cist/brg

CIST Bridge Configuration

[CIST Bridge Menu]
prior	- Set CIST bridge Priority (0-65535)
mxage	- Set CIST bridge Max Age (6-40 secs)		secs)
fwd	-	Set CIST bridge Forward Delay (4-30
cur	-	Display current CIST bridge parameters

CIST bridge parameters are used only when the switch is in MSTP or RSTP mode. CIST parameters do not affect operation of STP/PVST+.

Table 6-35CIST Bridge Configuration Menu Options (/cfg/l2/mrst/cist/brg)

Command Syntax and Usage

prior <0-65535>

Configures the CIST bridge priority. The bridge priority parameter controls which bridge on the network is the MSTP root bridge. To make this switch the root bridge, configure the bridge priority lower than all other switches and bridges on your network. The lower the value, the higher the bridge priority. The range is 0 to 65535, and the default is 32768.

mxage <6-40 seconds>

Configures the CIST bridge maximum age. The maximum age parameter specifies the maximum time the bridge waits without receiving a configuration bridge protocol data unit before it reconfig- ures the MSTP network. The range is 6 to 40 seconds, and the default is 20 seconds.

fwd <4-30 seconds>

Configures the CIST bridge forward delay parameter. The forward delay parameter specifies the amount of time that a bridge port has to wait before it changes from the listening state to the learn- ing state and from the learning state to the forwarding state. The range is 4 to 30 seconds, and the default is 15 seconds.

cur

Displays the current CIST bridge configuration.

228 „ The Configuration Menu BMD00007, November 2007