Enterasys Networks 9034313-07 manual Configuring Simple Network Time Protocol Sntp, Show sntp

Configuring Simple Network Time Protocol (SNTP)

Example

This example enables multicast flood protection.

C3(su)->set mac unreserved-flood enable

Configuring Simple Network Time Protocol (SNTP)

Purpose

To configure the Simple Network Time Protocol (SNTP), which synchronizes device clocks in a network.

Note: A management IP (host, routing interface, or loopback) address must be configured for SNTP to work..

Commands

For information about...	Refer to page...
show sntp	14-29
set sntp client	14-31
clear sntp client	14-31
set sntp server	14-32
clear sntp server	14-32
set sntp poll-interval	14-33
clear sntp poll-interval	14-33
set sntp poll-retry	14-34
clear sntp poll-retry	14-34
set sntp poll-timeout	14-35
clear sntp poll-timeout	14-35
set timezone	14-36
show sntp interface	14-37
set sntp interface	14-37
clear sntp interface	14-38

show sntp

Use this command to display SNTP client settings.

Syntax

show sntp

SecureStack C3 Configuration Guide 14-29