Enterasys Networks 9034313-07 manual Clear logging interface

clear logging interface

C3(rw)->router(Config)#exit

C3(rw)->router#exit

C3(rw)->router>exit

C3(rw)->set logging interface vlan 100

C3(rw)->show logging interface vlan 100 192.168.10.1

clear logging interface

Use this command to clear the interface used for the source IP address of the system logging back to the default of the Host interface.

Syntax

clear logging interface

Parameters

None.

Defaults

None.

Mode

Switch command, read‐write.

Example

This command returns the interface used for the source IP address of the system logging back to the default of the Host interface.

C3(rw)->show logging interface

vlan 100 192.168.10.1

C3(rw)->clear logging interface

C3(rw)->

SecureStack C3 Configuration Guide 14-13