Enterasys Networks 9034313-07 manual Set port duplex, Full half

set port duplex

Example

This example shows how to display the default duplex setting for Ethernet port 14 in slot 3:

C3(su)->show port duplex ge.3.14

default duplex mode is full on port ge.3.14.

set port duplex

Use this command to set the default duplex type for one or more ports. This command will only take effect on ports that have auto‐negotiation disabled.

Syntax

set port duplex port-string{full half}

Parameters

port‐string	Specifies the port(s) for which duplex type will be set. For a detailed
	description of possible port‐string values, refer to “Port String Syntax
	Used in the CLI” on page 7‐1.
full half	Sets the port(s) to full‐duplex or half‐duplex operation.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to set ge.1.17 to full duplex:

C3(su)->set port duplex ge.1.17 full

SecureStack C3 Configuration Guide 7-13