Enterasys Networks 9034313-07 manual Show port alias, Set port alias

show port alias

show port alias

Use this command to display the alias name for one or more ports.

Syntax

show port alias [port-string]

Parameters

port‐string	(Optional) Displays alias name(s) for specific port(s). For a detailed
	description of possible port‐string values, refer to “Port String Syntax
	Used in the CLI” on page 7‐1.

Defaults

If port‐string is not specified, aliases for all ports will be displayed.

Mode

Switch command, read‐only.

Example

This example shows how to display alias information for ports 1‐3 on slot 3:

C3(rw)->show port alias ge.3.1-3

Port ge.3.1 user

Port ge.3.2 user

Port ge.3.3 Admin

set port alias

Use this command to assign an alias name to a port.

Syntax

set port alias port-string [name]

Parameters

port‐string	Specifies the port to which an alias will be assigned. For a detailed
	description of possible port‐string values, refer to “Port String Syntax
	Used in the CLI” on page 7‐1.
name	(Optional) Assigns an alias name to the port. If the alias name contains
	spaces, the text string must be surrounded by double quotes. Maximum
	length is 60 characters.

Defaults

If name is not specified, the alias assigned to the port will be cleared.

Mode

Switch command, read‐write.

SecureStack C3 Configuration Guide 7-9