Enterasys Networks 9034313-07 manual Set igmpsnooping interfacemode

set igmpsnooping interfacemode

Usage

In order for IGMP snooping to be enabled on one or all ports, it must be globally enabled on the device with this command, and then enabled on a port(s) using the set igmpsnooping interface mode command as described in “set igmpsnooping interfacemode” on page 13‐4.

Note: IGMP snooping cannot be controlled via WebView.

Example

This example shows how to enable IGMP on the system:

C3(su)->set igmpsnooping adminmode enable

set igmpsnooping interfacemode

Use this command to enable or disable IGMP on one or all ports.

Syntax

set igmpsnooping interfacemode port-string{enable disable}

Parameters

port‐string Specifies one or more ports on which to enable or disable IGMP.

enable disable Enables or disables IGMP.

Defaults

None.

Mode

Switch command, read‐write.

Usage

In order for IGMP snooping to be enabled on one or all ports, it must be globally enabled on the device using the set igmpsnooping adminmode command as described in “set igmpsnooping adminmode” on page 13‐3, and then enabled on a port(s) using this command.

Example

This example shows how to enable IGMP on port ge.1.10:

C3(su)->set igmpsnooping interfacemode ge.1.10 enable

set igmpsnooping groupmembershipinterval

Use this command to configure the IGMP group membership interval time for the system.

Syntax

set igmpsnooping groupmembershipinterval time

13-4 IGMP Configuration