Enterasys Networks 9034313-07 manual Clear nodealias config

clear nodealias config

Itʹs important to make sure that inter‐switch links are not learning node/alias information, as it would slow down searches by the NetSight Compass and ASM tools and give inaccurate results.

Example

This example shows how to disable the node alias agent on ge.1.3:

C3(su)->set nodealias disable ge.1.3

clear nodealias config

Use this command to reset node alias state to enabled and clear the maximum entries value.

Syntax

clear nodealias config port-string

Parameters

port‐string Specifies the port(s) on which to reset the node alias configuration.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to reset the node alias configuration on ge.1.3:

C3(su)->clear nodealias config ge.1.3

14-42 Logging and Network Management