Enterasys Networks 9034313-07 manual Commands, Configuration Tasks

Configuring Link Layer Discovery Protocol and LLDP-MED

Commands

The commands used to review and configure the CDP discovery protocol are listed below.

For information about...	Refer to page...
show lldp	6-15
show lldp port status	6-16
show lldp port trap	6-16
show lldp port tx-tlv	6-17
show lldp port location-info	6-17
show lldp port local-info	6-18
show lldp port remote-info	6-21
show lldp port network-policy	6-22
set lldp tx-interval	6-23
set lldp hold-multiplier	6-24
set lldp trap-interval	6-24
set lldp med-fast-repeat	6-25
set lldp port status	6-26
set lldp port trap	6-26
set lldp port med-trap	6-27
set lldp port location-info	6-27
set lldp port tx-tlv	6-28
set lldp port network-policy	6-30
clear lldp	6-31
clear lldp port status	6-32
clear lldp port trap	6-32
clear lldp port med-trap	6-33
clear lldp port location-info	6-33
clear lldp port network-policy	6-34
clear lldp port tx-tlv	6-35

Configuration Tasks

The commands included in this implementation allow you to perform the following configuration tasks:

6-14 Discovery Protocol Configuration