Enterasys Networks 9034313-07 manual Set tacacs, Show tacacs server

set tacacs TACACS+ Configuration

Table 27-1 show tacacs Output Details (Continued)

Output...	What it displays...
TACACS+ singleconnect state	Whether TACACS+ singleconnect is enabled or disabled.
	When enabled, the TACACS+ client sends multiple requests over a
	single TCP connection.
TACACS+ service	The name of the service that is requested by the TACACS+ client for
	session authorization. “exec” is the default service name.
TACACS+ session authorization	Displays the attribute – value pairs that are mapped to the read-only,
A-V pairs	read-write, and super-useraccess privilege levels for the service
	requested for session authorization.
	The attribute names and values shown in the example above are the
	default values.
TACACS+ Server	Displays the TACACS+ server information used by the TACACS+
	client.

set tacacs

Use this command to enable or disable the TACACS+ client.

Syntax

set tacacs {enable disable}

Parameters

enable disable Enables or disables the TACACS client.

Defaults

None.

Mode

Switch command, Read‐Write.

Usage

The TACACS+ client can be enabled on the switch anytime, with or without a TACACS+ server online. If the TACACS+ server is offline and TACACS+ is enabled, the login authentication is switched to RADIUS or local, if enabled.

Examples

This example shows how to enable the TACACS+ client.

C3(rw)->set tacacs enable

show tacacs server

Use this command to display the current TACACS+ server configuration.

Syntax

show tacacs server {index all}

SecureStack C3 Configuration Guide 27-3