Enterasys Networks 9034313-07 manual Following table describes the output fields

sFlow Configuration show sflow receivers

This example displays information about the Collector with index 1.

C3(su)->show sflow receivers 1
Receiver Index	1
Owner String	ets1
Time out	17758
IP Address:	10.1.2.117
Address Type	IPv4
Port	6343
Datagram Version	5
Maximum Datagram Size	1400

The following table describes the output fields.

Table 28-2 show sflow receivers Output Descriptions

Output...	What it displays...
Receiver Index	Index number of a specific Collector entry in the sFlow Receivers
	Table. Up to 8 Collectors may be configured.
Owner String	Identity string of the Collector. An empty string indicates that the
	entry is unclaimed and cannot be assigned to a sampler or poller
	instance. The owner string is configured with the set sflow receiver
	owner command.
Time Out	The time remaining, in seconds, before the sampler or poller is
	released and stops sending samples to this receiver/Collector.
	The timeout value is configured with the set sflow receiver owner
	command.
IP Address	The IP address of this receiver/Collector. The IP address is
	configured with the set sflow receiver ip command.
Address Type	Whether the Collector IP address is IPv4 or IPv6.
Port	The UDP port number on this receiver/Collector to which sample
	datagrams should be sent. The default value is 6343, which can
	be changed with the set sflow receiver port command.
Datagram Version	Specifies the sFlow version used for formatting the sample
	datagrams.
Max Datagram Size	The maximum number of data bytes that can be sent in a single
	sample datagram to this receiver/Collector. The default value is
	1400 bytes, which can be changed with the set sflow receiver
	maxdatagram command.

28-6