Enterasys Networks 9034313-07 manual ‐1 provides an explanation of the command output

show ipv6 ospf

ABR Status	Interval	Enable
Exit Overflow		0
External LSA Count		0
External LSA Checksum		0
New LSAs Originated		89
LSAs Received	Limit	177
External LSDB		No Limit
Default Metric		Not Configured
Maximum Paths	Advertise	4
Default Route		Disabled
Always		FALSE
Metric		External Type 2
Metric Type

Table 25‐1 provides an explanation of the command output.

Note: Some of the information in Table 25-1displays only if you enable OSPFv3 and configure certain features.

Table 25-1 show ipv6 ospf Output Details

Output Field	What It Displays...
Router ID	A 32 bit integer in dotted decimal format identifying the router,
	about which information is displayed. This is a configured value.
OSPF Admin Mode	Whether the administrative mode of OSPF in the router is enabled
	or disabled. This is a configured value.
ASBR Mode	Whether the ASBR mode is enabled or disabled. Enable implies
	that the router is an autonomous system border router. Router
	automatically becomes an ASBR when it is configured to
	redistribute routes learnt from other protocol. The possible values
	for the ASBR status is enabled (if the router is configured to re-
	distribute routes learnt by other protocols) or disabled (if the router
	is not configured for the same).
ABR Status	Whether the router is an OSPF Area Border Router.
Exit Overflow Interval	The number of seconds that, after entering Overflow State, a
	router will attempt to leave Overflow State.
External LSA Count	The number of external (LS type 5) link-state advertisements in
	the link-state database.
External LSA Checksum	The sum of the LS checksums of external link-state
	advertisements contained in the link-state database.
New LSAs Originated	The number of new link-state advertisements that have been
	originated.
LSAs Received	The number of link-state advertisements received determined to
	be new instantiations.
External LSDB Limit	The maximum number of non-default AS-external-LSAs entries
	that can be stored in the link-state database.
Default Metric	Default value for redistributed routes.
Maximum Paths	The maximum number of paths that OSPF can report for a given
	destination.
Default Route Advertise	Whether the default routes received from other source protocols
	are advertised or not.

25-30 OSPFv3 Configuration