Enterasys Networks 9034313-07 manual Clear macauthentication portquietperiod

clear macauthentication portquietperiod

Defaults

None.

Mode

Switch command, read‐write.

Example

This example sets port 1 to wait 5 seconds after a failed authentication attempt before a new attempt can be made:

C3(su)->set macauthentication portquietperiod 5 ge.1.1

clear macauthentication portquietperiod

This sets the quiet period back to the default value of 30 seconds.

Syntax

clear macauthentication portquietperiod [port-string]

Parameters

port‐string	(Optional) Specifies the ports for which the quiet period is to be reset. For a
	detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.

Defaults

If a port‐string is not specified then all ports will be set to the default port quiet period.

Mode

Switch command, read‐write.

Example

This example resets the default quiet period on port 1:

C3(su)->clear macauthentication portquietperiod ge.1.1

set macauthentication macinitialize

Use this command to force a current MAC authentication session to re‐initialize and remove the session.

Syntax

set macauthentication macinitialize mac-addr

Parameters

mac‐addr Specifies the MAC address of the session to re‐initialize.

SecureStack C3 Configuration Guide 26-31