Enterasys Networks 9034313-07 manual Policy Classification Configuration

11

Policy Classification Configuration

This chapter describes the Policy Classification set of commands and how to use them.

For information about...	Refer to page...
Policy Classification Configuration Summary	11-1
Configuring Policy Profiles	11-2
Configuring Classification Rules	11-6
Assigning Ports to Policy Profiles	11-15
Configuring Policy Class of Service (CoS)	11-17

Note: An Enterasys Networks Feature Guide document containing an in-depth discussion of Policy configuration is located on the Enterasys Networks web site:

http://www.enterasys.com/support/manuals/

Policy Classification Configuration Summary

SecureStack C3 devices support policy profile‐based provisioning of network resources by allowing IT administrators to:

•Create, change or remove policy profiles based on business‐specific use of network services.

•Permit or deny access to specific services by creating and assigning classification rules which map user profiles to protocol‐based frame filtering policies configured for a particular VLAN or Class of Service (CoS).

•Assign or unassign ports to policy profiles so that only ports activated for a profile will be allowed to transmit frames accordingly.

Note: It is recommended that you use Enterasys Networks NMS Policy Manager as an alternative to CLI for configuring policy classification on the SecureStack C3 devices.

SecureStack C3 Configuration Guide 11-1