Enterasys Networks 9034313-07 manual Clear logging application, Show logging local

clear logging application

Example

This example shows how to set the severity level for SNMP to 4 so that error conditions will be logged for that application.

C3(rw)->set logging application SNMP level 4

clear logging application

Use this command to reset the logging severity level for one or all applications to the default value of 6 (notifications of significant conditions).

Syntax

clear logging application {mnemonic all}

Parameters

mnemonic	Resets the severity level for a specific application to 6. Valid mnemonic
	values and their corresponding applications are listed in Table 14‐3 on
	page 14‐8.
all	Resets the severity level for all applications to 6.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to reset the logging severity level to 6 for SNMP.

C3(rw)->clear logging application SNMP

show logging local

Use this command to display the state of message logging to the console and a persistent file.

Syntax

show logging local

Parameters

None.

Defaults

None.

Mode

Switch command, read‐only.

SecureStack C3 Configuration Guide 14-9