Enterasys Networks 9034313-07 manual Set macauthentication macreauthenticate

		set macauthentication macreauthenticate
Parameters
	port‐string	Specifies MAC authentication port(s) to be reauthenticated. For a detailed
		description of possible port‐string values, refer to “Port String Syntax Used
		in the CLI” on page 7‐1.
Defaults
	None.
Mode

Switch command, read‐write.

Example

This example shows how to force ge.2.1 though 5 to reauthenticate:

C3(su)->set macauthentication portreauthentication ge.2.1-5

set macauthentication macreauthenticate

Use this command to force an immediate reauthentication of a MAC address.

Syntax

set macauthentication macreauthenticate mac-addr

Parameters

mac‐addr Specifies the MAC address of the session to reauthenticate.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to force the MAC authentication session for address 00‐60‐97‐b5‐4c‐07 to reauthenticate:

C3(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07

set macauthentication reauthperiod

Use this command to set the MAC reauthentication period (in seconds). This is the time lapse between attempts to reauthenticate any current MAC address authenticated to a port.

Syntax

set macauthentication reauthperiod time port-string

SecureStack C3 Configuration Guide 26-33