Enterasys Networks 9034313-07 manual Set snmp targetparams, Show snmp targetparams Output Details

set snmp targetparams

Target Parameter Name	= v2cExampleParams
Security Name	= public
Message Proc. Model	= SNMPv2c
Security Level	= noAuthNoPriv
Storage type	= nonVolatile
Row status	= active
Target Parameter Name	= v3ExampleParams
Security Name	= CharlieDChief
Message Proc. Model	= USM
Security Level	= authNoPriv
Storage type	= nonVolatile
Row status	= active

Table 8‐8 provides an explanation of the command output.

Table 8-8 show snmp targetparams Output Details

Output Field	What It Displays...
Target Parameter Name	Unique identifier for the parameter in the SNMP target parameters table.
	Maximum length is 32 bytes.
Security Name	Security string definition.
Message Proc. Model	SNMP version.
Security Level	Type of security level (auth: security level is set to use authentication
	protocol, noauth: security level is not set to use authentication protocol,
	or privacy).
Storage type	Whether entry is stored in volatile, nonvolatile or read-onlymemory.
Row status	Status of this entry: active, notInService, or notReady.

set snmp targetparams

Use this command to set SNMP target parameters, a named set of security/authorization criteria used to generate a message to a target.

Syntax

set snmp targetparams paramsname user user security-model {v1 v2c usm} message- processing {v1 v2c v3} [noauthentication authentication privacy] [volatile nonvolatile]

Parameters

paramsname	Specifies a name identifying parameters used to generate SNMP messages
	to a particular target.
user user	Specifies an SNMPv1 or v2 community name or an SNMPv3 user name.
	Maximum length is 32 bytes.
security‐model v1	Specifies the SNMP security model applied to this target parameter as
v2c usm	version 1, 2c or 3 (usm).
message‐	Specifies the SNMP message processing model applied to this target
processing v1 v2c	parameter as version 1, 2c or 3.
v3

8-24 SNMP Configuration