Enterasys Networks 9034313-07 manual Set sntp client, Clear sntp client

	set sntp client
Table 14-7 show sntp Output Details (Continued)
Output Field	What It Displays...
Last SNTP Update	Date and time of most recent SNTP update.
Last SNTP Request	Date and time of most recent SNTP request.
Last SNTP Status	Whether or not broadcast reception or unicast transmission and reception was
	successful.
SNTP-Server	IP address(es) of SNTP server(s).
Precedence	Precedence level of SNTP server in relation to its peers. Highest precedence is 1
	and lowest is 10. Default of 1 can be reset using the set sntp server command (“set
	sntp server” on page 14-32).
Status	Whether or not the SNTP server is active.

set sntp client

Use this command to set the SNTP operation mode.

Syntax

set sntp client {broadcast unicast disable}

Parameters

broadcast	Enables SNTP in broadcast client mode.
unicast	Enables SNTP in unicast (point‐to‐point) client mode. In this mode, the
	client must supply the IP address from which to retrieve the current time.
disable	Disables SNTP.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to enable SNTP in broadcast mode:

C3(su)->set sntp client broadcast

clear sntp client

Use this command to clear the SNTP client’s operational mode.

Syntax

clear sntp client

Parameters

None.

SecureStack C3 Configuration Guide 14-31