Enterasys Networks 9034313-07 manual Clear policy port

clear policy port

clear policy port

Use this command to remove a policy profile from one or more ports.

Syntax

clear policy port port-string profile-index

Parameters

port‐string	Specifies the port(s) from which to remove the policy profile. For a
	detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.
profile‐index	Specifies the ID of the policy profile (role) to which the port(s) will be
	added. This value must match the profile‐index value assigned using the
	set policy profile command (“set policy profile” on page 11‐4) in order
	for a policy profile to be active on the specified port.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to remove policy profile 10 from port 21 in slot 1:

C3(rw)->clear policy port ge.1.21 10

11-16 Policy Classification Configuration