Enterasys Networks 9034313-07 manual Clear maclock firstarrival, Set maclock agefirstarrival

clear maclock firstarrival

Example

This example shows how to restrict MAC locking to 6 MAC addresses on ge.2.3:

C3(su)->set maclock firstarrival ge.2.3 6

clear maclock firstarrival

Use this command to reset the number of first arrival MAC addresses allowed per port to the default value of 600.

Syntax

clear maclock firstarrival port-string

Parameters

port‐string	Specifies the port on which to reset the first arrival value. For a detailed
	description of possible port‐string values, refer to “Port String Syntax Used
	in the CLI” on page 7‐1.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example shows how to reset MAC first arrivals on ge.2.3:

C3(su)->clear maclock firstarrival ge.2.3

set maclock agefirstarrival

Use this command to enable or disable the aging of first arrival MAC addresses. When enabled, first arrival MAC addresses that are aged out of the forwarding database will be removed from the associated port MAC lock.

Syntax

set maclock agefirstarrival port-string{enable disable}

Parameters

port‐string	Specifies the port(s) on which to enable or disable first arrival aging. For
	a detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.
enable disable	Enable or disable first arrival aging. By default, first arrival aging is
	disabled.

Defaults

None.

SecureStack C3 Configuration Guide 26-65