Enterasys Networks 9034313-07 Configuring Spanning Tree Port Parameters, Set spantree portadmin

Configuring Spanning Tree Port Parameters

Configuring Spanning Tree Port Parameters

Purpose

To display and set Spanning Tree port parameters.

Commands

For information about...	Refer to page...
set spantree portadmin	9-34
clear spantree portadmin	9-35
show spantree portadmin	9-35
show spantree portpri	9-36
set spantree portpri	9-36
clear spantree portpri	9-37
show spantree adminpathcost	9-38
set spantree adminpathcost	9-38
clear spantree adminpathcost	9-39
show spantree adminedge	9-39
set spantree adminedge	9-39
clear spantree adminedge	9-40
show spantree operedge	9-41

set spantree portadmin

Use this command to disable or enable the Spanning Tree algorithm on one or more ports.

Syntax

set spantree portadmin port-string{disable enable}

Parameters

port‐string	Specifies the port(s) for which to enable or disable Spanning Tree. For a
	detailed description of possible port‐string values, refer to “Port String
	Syntax Used in the CLI” on page 7‐1.
disable enable	Disables or enables Spanning Tree.

Defaults

None.

Mode

Switch command, read‐write.

9-34 Spanning Tree Configuration