Enterasys Networks 9034313-07 manual Clear vlanauthorization, Show vlanauthorization

clear vlanauthorization

Defaults

By default, administrative egress is set to untagged.

Mode

Switch command, read‐write.

Example

This example shows how to enable the insertion of the RADIUS assigned VLAN to an 802.1q tag for all outbound frames for ports 10 through 15 on unit/module number 3.

C3(rw)->set vlanauthorization egress tagged ge.3.10-15

clear vlanauthorization

Use this command to return port(s) to the default configuration of VLAN authorization disabled, egress untagged.

Syntax

clear vlanauthorization [port-string]

Parameters

port‐string	(Optional) Specifies which ports are to be restored to default
	configuration. If no port string is entered, the action will be a global
	setting. For a detailed description of possible port‐string values, refer to
	“Port String Syntax Used in the CLI” on page 7‐1.

Defaults

If no port string is entered, all ports a will be reset to default configuration with VLAN authorization disabled and egress frames untagged.

Mode

Switch command, read‐write.

Example

This example show how to clear VLAN authorization for all ports on slots 3, 4, and 5:

C3(rw)->clear vlanauthorization ge.3-5.*

show vlanauthorization

Displays the VLAN authentication status and configuration information for the specified ports.

Syntax

show vlanauthorization [port-string]

SecureStack C3 Configuration Guide 26-51