Enterasys Networks 9034313-07 manual Show ip protocol, Set ip protocol

show ip protocol

Mode

Switch command, read‐write.

Example

This example shows how to clear the system IP address:

C3(rw)->clear ip address

show ip protocol

Use this command to display the method used to acquire a network IP address for switch management.

Syntax

show ip protocol

Parameters

None.

Defaults

None.

Mode

Switch command, read‐only.

Example

This example shows how to display the method used to acquire a network IP address:

C3(su)->show ip protocol

System IP address acquisition method: dhcp

set ip protocol

Use this command to specify the protocol used to acquire a network IP address for switch management.

Syntax

set ip protocol {bootp dhcp none}

Parameters

bootp	Selects BOOTP as the protocol to use to acquire the system IP address.
dhcp	Selects DHCP as the protocol to use to acquire the system IP address.
none	No protocol will be used to acquire the system IP address.

Defaults

None.

3-12 Basic Configuration