Enterasys Networks 9034313-07 manual Set dhcp pool next-server, Clear dhcp pool next-server

set dhcp pool next-server

set dhcp pool next-server

Use this command to specify the file server from which the default boot image is to be loaded by the client.

Syntax

set dhcp pool poolname next-server ip-address

Parameters

poolname	Specifies the name of the address pool. Pool names may be up to 31
	characters in length.
ip‐address	Specifies the IP address of the file server the DHCP client should contact
	to load the default boot image.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example specifies the file server from which clients being served by address pool “auto1” should download the boot image file “image1.img.”

C3(rw)->set dhcp pool auto1 bootfile image1.img

C3(rw)->set dhcp pool auto1 next-server 10.1.1.10

clear dhcp pool next-server

Use this command to remove the boot image file server from the address pool being configured.

Syntax

clear dhcp pool poolname next-server

Parameters

poolname	Specifies the name of the address pool. Pool names may be up to 31
	characters in length.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example removes the file server from address pool “auto1.”

C3(rw)->clear dhcp pool auto1 next-server

SecureStack C3 Configuration Guide 16-21