Enterasys Networks 9034313-07 manual Set lacp asyspri, Set lacp aadminkey, Asyspri

set lacp asyspri

set lacp asyspri

Use this command to set the LACP system priority.

Syntax

set lacp asyspri value

Parameters

asyspri	Sets the system priority to be used in creating a LAG (Link Aggregation
	Group) ID. Valid values are 0 to 65535.
value	Specifies a system priority value. Valid values are 0 to 65535, with
	precedence given to lower values.

Defaults

None.

Mode

Switch command, read‐write.

Usage

LACP uses this value to determine aggregation precedence. If there are two partner devices competing for the same aggregator, LACP compares the LAG IDs for each grouping of ports. The LAG with the lower LAG ID is given precedence and will be allowed to use the aggregator.

Example

This example shows how to set the LACP system priority to 1000:

C3(su)->set lacp asyspri 1000

set lacp aadminkey

Use this command to set the administratively assigned key for one or more aggregator ports.

Syntax

set lacp aadminkey port-string value

Parameters

port‐string	Specifies the LAG port(s) on which to assign an admin key.
value	Specifies an admin key value to set. Valid values are 0 to 65535. The
	default admin key value is 32768.

Defaults

None.

Mode

Switch command, read‐write.

SecureStack C3 Configuration Guide 7-47