Enterasys Networks 9034313-07 manual Ipv6 route distance

	ipv6 route distance
next‐hop‐addr	Link‐local address of the interface.
pref	(Optional) Specifies the preference value the router uses to compare
	this route with routes from other route sources that have the same
	destination.
	The value of pref can range from1 to 255. The default value is 1, which
	gives static routes precedence over any other type of route except
	connected routes.
	A route with a preference of 255 cannot be used to forward traffic.

Defaults

Default preference or administrative distance is 1.

Mode

Router global configuration: C3(su)‐>router(Config)#

Usage

Use the no form of this command to remove a static route. If you do not specify a next hop address with the no form, all static routes to the specified destination will be removed.

Example

This command creates a static IPv6 route to network 2001:0DB8:2222:4455::/64 by way of interface VLAN 6 and gives it a preference of 5.

C3(su)->router(Config)# ipv6 route 2001:0DB8:2222:4455::/64 interface vlan 6 fe80::1234:5678:2dd:1 5

ipv6 route distance

This command configures the default distance, or preference, for static IPv6 routes.

Syntax

ipv6 route distance pref no ipv6 route distance

Parameters

pref	A distance value used when no distance is specified when a static
	route is configured.
	The value can range from 1 to 255. Lower route distance values are
	preferred when determining the best route.

Defaults

Default preference or administrative distance is 1.

Mode

Router global configuration: C3(su)‐>router(Config)#

SecureStack C3 Configuration Guide 22-5