Enterasys Networks 9034313-07 manual Clear gvrp, Set garp timer

clear gvrp

Mode

Switch command, read‐write.

Examples

This example shows how to enable GVRP globally on the device:

C3(su)->set gvrp enable

This example shows how to disable GVRP globally on the device:

C3(su)->set gvrp disable

This example shows how to enable GVRP on ge.1.3:

C3(su)->set gvrp enable ge.1.3

clear gvrp

Use this command to clear GVRP status or on one or more ports.

Syntax

clear gvrp [port-string]

Parameters

port‐string	(Optional) Clears GVRP status on specific port(s). For a detailed description of
	possible port‐string values, refer to “Port String Syntax Used in the CLI” on
	page 7‐1.

Defaults

If port‐string is not specified, GVRP status will be cleared for all ports.

Mode

Switch command, read‐write.

Example

This example shows how to clear GVRP status globally on the device:

C3(su)->clear gvrp

set garp timer

Use this command to adjust the values of the join, leave, and leaveall timers.

Syntax

set garp timer {[join timer-value] [leave timer-value] [leaveall timer-value]}port-string

Parameters

join timer‐value	Sets the GARP join timer in centiseconds (Refer to 802.1Q standard.)
leave timer‐value	Sets the GARP leave timer in centiseconds (Refer to 802.1Q standard.)

10-24 802.1Q VLAN Configuration