Enterasys Networks 9034313-07 manual Clear dhcp pool option, Show dhcp pool configuration

clear dhcp pool option

clear dhcp pool option

Use this command to remove a DHCP option from the address pool being configured.

Syntax

clear dhcp pool poolname option code

Parameters

poolname	Specifies the name of the address pool. Pool names may be up to 31
	characters in length.
code	Specifies the DHCP option code, as defined in RFC 2132. Value can range
	from 1 to 254.

Defaults

None.

Mode

Switch command, read‐write.

Example

This example removes option 19 from address pool “auto1.”

C3(rw)->clear dhcp pool auto1 option 19

show dhcp pool configuration

Use this command to display configuration information for one or all address pools.

Syntax

show dhcp pool configuration {poolname all}

Parameters

poolname	Specifies the name of the address pool. Pool names may be up to 31
	characters in length.

Defaults

None.

Mode

Read‐only.

Example

This example displays configuration information for all address pools.

C3(rw)->show dhcp pool configuration all

Pool: Atg_Pool	Dynamic
Pool Type

SecureStack C3 Configuration Guide 16-29