Enterasys Networks 9034313-07 manual Show multiauth port, Set multiauth port

show multiauth port

Mode

Switch command, read‐write.

Example

This example shows how to clear the multiple authentication precedence:

C3(rw)->clear multiauth precedence

show multiauth port

Use this command to display multiple authentication properties for one or more ports.

Syntax

show multiauth port [port-string]

Parameters

port‐string (Optional) Displays multiple authentication information for specific port(s).

Defaults

If port‐string is not specified, multiple authentication information will be displayed for all ports.

Mode

Switch command, read‐only.

Example

This example shows how to display multiple authentication information for ports ge.3.1‐4. The number of “Max users” shown by this command varies depending on the platform.

C3(rw)->show multiauth port ge.3.1-4

Port	Mode	Max	Allowed	Current
------------	------------	users	users	users
		----------	----------	----------
ge.3.1	auth-opt	n	1	0
ge.3.2	auth-opt	n	1	0
ge.3.3	auth-opt	n	1	0
ge.3.4	auth-opt	n	1	0

set multiauth port

Use this command to set multiple authentication properties for one or more ports.

Syntax

set multiauth port mode {auth-opt auth-reqd force-auth force-unauth} numusers numusers port-string

SecureStack C3 Configuration Guide 26-41