Enterasys Networks 9034313-07 manual Type 2. The following baud rate selection screen displays

Downloading a Firmware Image

1 - Start operational code.

2 - Start Boot Menu. Select (1, 2):2

Password: *************

2.Before the boot up completes, type 2 to select “Start Boot Menu”. Use “administrator” for the Password.

Note: The “Boot Menu” password “administrator” can be changed using boot menu option 11.

Boot Menu Version 01.00.29 05-09-2005

Options available

1- Start operational code

2- Change baud rate

3- Retrieve event log using XMODEM (64KB).

4- Load new operational code using XMODEM

5- Display operational code vital product data

6- Run Flash Diagnostics

7- Update Boot Code

8- Delete operational code

9- Reset the system

10- Restore Configuration to factory defaults (delete config files)

11- Set new Boot Code password

[Boot Menu] 2

3.Type 2. The following baud rate selection screen displays:

1 - 1200

2 - 2400

3 - 4800

4 - 9600

5 - 19200

6 - 38400

7 - 57600

8 - 115200

0 - no change

4.Type 8 to set the switch baud rate to 115200. The following message displays:

Setting baud rate to 115200, you must change your terminal baud rate.

5.Set the terminal baud rate to 115200 and press ENTER.

6.From the boot menu options screen, type 4 to load new operational code using XMODEM. When the XMODEM transfer is complete, the following message and header information will display:

[Boot Menu] 4

Ready to receive the file with XMODEM/CRC....

Ready to RECEIVE File xcode.bin in binary mode

Send several Control-X characters to cCKCKCKCKCKCKCK

XMODEM transfer complete, checking CRC....

Verified operational code CRC.

SecureStack C3 Configuration Guide 3-33